• gb
    • en
Change Your Region / Country:  
Technology-Based Solutions for the Environment
MENU

Environmental Remediation at Active Electronics Manufacturing Facility, Sweden


DNAPL and chlorinated solvent contamination treatment

Summary

Significant TCE soil and groundwater contamination was discovered during the refurbishment of an electronics manufacturing facility. This prompted site investigations to delineate a 450msource area and identified DNAPL contamination along the utility conduits and associated factory infrastructure. Treatment of these areas was required, without damaging or replacing the factory infrastructure and so an in-situ remedial approach was taken.

icon-pdf Environmental Remediation at Active Electronics Manufacturing Facility, SwedenDownload the pdf

52_OlC41994_site Environmental Remediation at Active Electronics Manufacturing Facility, Sweden

Treatment

Following injection, 3-D Microemulsion® created anaerobic conditions in order to stimulate and maintain the growth of microbes called reductive dechlorinators. This enhanced reductive dechlorination (ERD) of the TCE through to full mineralisation of the contamination, without any buildup of hazardous breakdown products or gases. The subsurface infrastructure was not affected and the refurbishment of the factory continued without interruption.

What’s Special?

  • Following injection, 3-D Microemulsion created anaerobic conditions in order to stimulate and maintain the growth of microbes called reductive dechlorinators. This enhanced reductive dechlorination (ERD) of the TCE through to full mineralisation of the contamination, without any buildup of hazardous breakdown products or gases.
  • The subsurface infrastructure was not affected and the refurbishment of the factory continued without interruption.
52_PS_Reg_1301_OlC41994_TCE_SE Environmental Remediation at Active Electronics Manufacturing Facility, Sweden