• gb
    • en
Change Your Region / Country:  
Technology-Based Solutions for the Environment
MENU

In Situ Remediation of MTBE and BTEX at Active Petrol Filling Station


A combination of ORC-Advanced and ORC primer for MTBE treatment

Summary

  • The groundwater was impacted with MTBE and residual concentrations of BTEX at an Active Petrol Filling Station in Tuscany, Italy.
  • Several pilot tests have been carried out on site in order to select the best treatment technology.
  • For full scale treatment, dissolved oxygen release, through a combination of REGENESIS’ ORC-Advanced® and ORC Primer®, was selected over Air Sparging and Biosparging technologies, allowing for better treatment efficiency.

icon-pdf In Situ Remediation of MTBE and BTEX at Active Petrol Filling StationDownload the pdf

31_PaG33554_site In Situ Remediation of MTBE and BTEX at Active Petrol Filling Station

Treatment

ORC-Advanced and ORC Primer have been applied through 17 injection wells in order to cover the contaminated area as best as possible, as access is restricted due to the existing operational tank farm. Both ORC products – each with different oxygen release patterns – can be applied together in a single injection activity. Three equal injection campaigns have been scheduled in accordance with the approved remediation plan.

What’s Special?

ORC not only allows for better efficiency than Air Sparging and Biosparging on this low permeability site, minimising preferential pathways and providing oxygen already in dissolved form and not in air form, but also minimises disturbance to site activities and does not require periodical equipment maintenance.

Furthermore, as Regenesis can provide a range of ORC compounds with different oxygen release patterns, treatment can be customised by combining of products into a mixture to best meet the aquifer’s specific needs.

31_PS_1312_Reg_PaG33554_MTBE_ORC_IT_En In Situ Remediation of MTBE and BTEX at Active Petrol Filling Station