• gb
    • en
Change Your Region / Country:  
Technology-Based Solutions for the Environment
MENU

Redevelopment of Former Manufacturing Facility, Northern Italy


Low concentration chlorinated solvent treatment via ERD

Summary

Industrial activities at a former industrial site undergoing redevelopment in Northern Italy resulted in chlorinated solvent groundwater contamination requiring remediation. Contamination consisted of chlorinated constituents 1,2-Dichloropropane at 9 μg/L and 1,1-Dichloroethene at 1 μg/L.

However, the aquifer also showed a marked concentration of a competitor electron acceptor (approx. 1,000 μg/L sulphate). Due to very low target contaminant concentrations and difficult geology, physical and chemical remediation methods were rejected, and in-situ anaerobic bioremediation using REGENESIS’ 3-D Microemulsion® was deemed the most cost-effective approach.

icon-pdf Redevelopment of Former Manufacturing Facility, Northern ItalyDownload the pdf

55_AlL41179_Site Redevelopment of Former Manufacturing Facility, Northern Italy

Treatment

A total of 17,000 L 3-D Microemulsion was applied by Direct-Push into 26 No. injection points in a grid configuration with 3m by 3m spacing. Target treatment depth was 2m to 6m BGL within a saturated soil matrix with clay lenses formation.

What’s Special?

The challenge of treating very low contaminant concentrations within a low permeability formation was overcome by enhanced anaerobic bioremediation. Additionally, a mix of contaminants and competing electron acceptors did not hinder the performance of 3-D Microemulsion. Remedial works were completed in 2012 and long-term monitoring is ongoing.

55_PS_Regenesis_1211_AlL41179_DCE_IT Redevelopment of Former Manufacturing Facility, Northern Italy