Americas
Europe
Français
Deutsch
Italiano
EspañolREGENESIS Lab Services
Sample Collections Guidelines
Successful collection of field samples is essential to the analysis of REGENESIS soil oxidant demand testing and treatability studies. Download the Lab Services document for reference on the type of containers to use, quantity of soil and water samples for specified tests, and shipping guidelines for effective and efficient assessment of a particular REGENESIS technology.
Soil Oxidant Demand Testing
Soil Oxidant Demand (SOD) testing can be used to assess the suitability of an in situ chemical oxidation (ISCO) approach at a given site and further estimate the amount of oxidant consumed by the soil matrix during ISCO applications. REGENESIS offers SOD testing for their ISCO product lines: PersulfOx®, a persulfate-based oxidant, and RegenOx®, a percarbonate-based oxidant. The quantitative SOD test measures oxidant consumption by any oxidant sinks present in the soil matrix (ex. reduced minerals, organic materials). The results of the SOD test can be used alone or in combination with site characterization data to aid in determining the oxidant dose required to successfully remediate a given contaminated aquifer. Download the Soil Oxidant Demand document to learn more.
Chain of Custody Form
Samples are to be shipped overnight in a cooler packed with wet ice or ice packs. All samples for treatability studies or soil oxidant demand testing must be sent with a REGENESIS COC (chain of custody) form. Sampling containers and coolers will be provided by REGENESIS upon request. Download the REGENESIS chain of custody form to send your samples for testing.
FluxTracer® Specification Sheet
FluxTracer® Flux Mapping Tools are easy-to-use devices that vertically delineate contaminant mass flux and groundwater speed within an existing monitoring well to aid in site characterization and remedial designs. The FluxTracers consist of five separate two-foot-long stainless-steel screen canisters that are secured in series on a pre-measured central wire line equipped with a modified J-Plug well cap. FluxTracers are always pre-assembled, arriving at your site ready to deploy with no on-site construction required. Download the FluxTracer® Specification Sheet to learn more.
FluxTracer® Installation and Retrieval Instructions
This document outlines the procedures for installing, retrieving, and returning the REGENESIS® FluxTracer® device. REGENESIS will construct and ship a fully contained, ready to install FluxTracer. There is minimal preparation required to install and retrieve the FluxTracer. Download the FluxTracer Installation and Retrieval Instructions to learn more.
