• en
    • gb
Change Your Region / Country:  
Technology-Based Solutions for the Environment
MENU

Archives

Design Verification Testing In cases where a site assessment has led to the selection and design of a remediation program involving the subsurface application of fluids (e.g. chemical sorbents, oxidants, reductants, etc.) it pays to verify the assumptions used in the remediation design before implementation of the full remediation program. Design Verification Testing (DVT), also …

July 29, 2016

PlumeStop Technical Bulletin 1.1 Distribution through a Permeable Medium Technical Bulletin 2.1 Sorption of Contaminants from Solution: Terms & Principles Technical Bulletin 2.2 Sorption of Contaminants from Solution – Column Study Technical Bulletin 3.1 Post-Sorption Contaminant Biodegradation Technical Bulletin 4.1 Regeneration of Sorptive Capacity Technical Bulletin 5.1 In Situ Containment of PFOA and PFOS Using …

August 13, 2015

RegenOx® Application Manual RegenOx® is a proprietary in situ chemical oxidation process using a solid oxidant complex and an activator complex. RegenOx has very high activity capable of treating a very broad range of soil and groundwater contaminants, has significant longevity in the subsurface, and when handled appropriately is safe and easy to apply. The intention …

June 29, 2015

Please submit the form on this page to access our Safety Data Sheet (SDS) Center. Our SDS Center includes Safety Data Sheets in downloadable PDF format for the following products: Oxygen Release Compound Advanced (ORC Advanced®) ORC Advanced® Pellets Oxygen Release Compound (ORC®) Oxygen Release Compound Primer (ORC® Primer) PetroCleanze® PersulfOx® PersulfOx® SP RegenOx®Part A …

June 8, 2015

PlumeStop Liquid Activated Carbon represents a new patented technology innovation designed to address the challenges of excessive time and end-point uncertainty in groundwater bioremediation. Learn More For more information including a detailed white paper and technical bulletins on PlumeStop visit our PlumeStop page. If you need assistance with a current project and would like to …

May 12, 2015

HRC® Application Instructions Hydrogen Release Compound can be applied to the subsurface in a number of different ways. The application method chosen is often attributed to a range of factors including depth to groundwater, soil type, location and extent of contaminants, remediation objective, etc. Typical installation of HRC involves the use of direct-push technology which …

May 8, 2015

Featuring the application of PlumeStop® by Regenesis Remediation Services (RRS)

March 19, 2015

Featuring the application of PersulfOx by Regenesis Remediation Services (RRS)

December 19, 2014

RegenOx is a two-part chemical oxidant (a liquid and a solid) that destroy’s contaminants by means of robust chemical reactions, therefore distribution of RegenOx within the soil/groundwater matrix and contact with contaminants are of paramount importance. RegenOx is delivered to the subsurface using two primary methods, direct-injection and fixed-delivery wells. Direct-injection is typically the optimal …

September 17, 2014

ORC and ORC Advanced can be applied to the subsurface in a number of different ways. The application method chosen is often determined by a range of factors including depth to groundwater, soil type, location and extent of contaminants, remediation objectives, etc. Typical installation of these controlled-release oxygen amendments involves mixing the ORC or ORC …

September 16, 2014