PlumeStop pilot proves stringent concentration targets are achievable

Case study highlights

At an active industrial plant in Italy, a site investigation uncovered historic contamination relating to occasional spillages during the handling of chemicals. Two interconnected plumes have been detected: One widespread plume consisting of chlorinated solvents at low concentrations (<1,000 μg/l) spreading wider to approx. 40 meters at the property boundaries.

The second plume partly overlaps with the first plume on one side, and consists primarily of BTEX at higher concentrations (9,000 μg/l). This plume tapers to around 10 meters wide at the site boundary, (the source of this contamination is located closer to the site boundary). Italian legislation prescribes compliance to very stringent targets for many organic contaminants, which makes remediation necessary at this site.

BTEX and CVOC plume treatment under an active industrial facility, Italy
Ready to get started?

Our technical experts will work with you to design tailored remediation solutions that effectively address PFAS, chlorinated solvents, and petroleum hydrocarbons—helping you achieve your site goals with confidence.