Evaluating the longevity of a PFAS in situ colloidal activated carbon remedy

This article published in Wiley’s Remediation Journal uses various visualization and modeling methods to evaluate the in situ remediation of PFAS via colloidal activated carbon (CAC) at a site in Central Canada. A three-dimensional reactive transport model (ISR-MT3DMS) was used to indicate that the CAC remedy implemented at the site is likely to be effective for PFOS remediation for decades.

Remedial evaluation highlights featured in this article:

  • The in situ CAC remedy for PFOS at this site is likely to be effective for decades.
  • The only alternative to using in situ CAC injections at this site would be Pump and Treat (P&T), which would have to be operated for decades due to the ongoing nature of the PFAS source.
  • It is also possible to combine P&T and CAC in a site management strategy, such as using P&T at a site boundary where PFAS concentrations are higher, and implementing CAC barriers downgradient to mitigate plume migration.
  • Due to the relatively low cost to implement the CAC, and the ability to adapt the remedy in the future, this remediation approach may be viable at other PFAS sites.
PFAS remediation
Evaluating the longevity of a PFAS in situ colloidal activated carbon remedy
Ready to get started?

Our technical experts will work with you to design tailored remediation solutions that effectively address PFAS, chlorinated solvents, and petroleum hydrocarbons—helping you achieve your site goals with confidence.